Maintenance Intervals; Maintenance Work - Bosch TCE 4460 Instandsetzungsanleitung

5.2.2

Maintenance intervals

Maintenance
Clean moving machine parts, treat with oil
spray or kerosene and then lubricate with en-
gine oil or a suitable grease.
Check amount of condensate in filter assem-
bly. Drain condensate if necessary.
Check oil level in gear unit. The minimum oil
level must always be maintained.
Check the roller of the mounting head for
dirt.
Check oil level in oil atomizer. Top up oil if
necessary.
Check condition of plastic covers.
Check machine compressed air supply (min.
8 bar / max. 10 bar).
Tab. 5: Maintenance intervals
Robert Bosch GmbH
Maintenance | TCE 4460-TCE 4465 | 59
5.3
5.3.1
1. Detach the cap with dipstick (A).
2. Check whether the oil level is below the permissible
minimum limit (minimum oil level: constriction on
dipstick).
3. If the level is below the minimum, add a maximum of
x
500 ml of oil (Tab. 6).
x
x
x
x
x
x
Fig. 60:
5.3.2
1. Turn the red pushbutton (A) at the bottom of the water
separator to the left (clockwise).
2. Press the red pushbutton to drain off the condensate.
3. Release the red pushbutton (A) so that it returns to
the initial position.
Fig. 61:

Maintenance work

Checking gear oil
Oil level
Draining condensate
Draining condensate
1 695 100 278
en
|
2013-12-03