Replacing Racing Cylinder - Bosch TCE 4460 Instandsetzungsanleitung

en 44 | TCE 4460-TCE 4465 | Replacement of components
3.6

Replacing Racing cylinder

1. Unfasten the adjusting nuts (A) securing the adjusting
elements (B) for movement of the Racing mounting
column.
2. Unfasten the adjusting elements (B) for movement of
the Racing mounting column.
Fig. 15: Adjusting nuts and adjusting elements for Racing mount-
ing column
3. Use the switch (C) to move the Racing mounting col-
umn to the "Racing" position.
Fig. 16: Switch for "Standard/Racing" position
|
1 695 100 278 2013-12-03
4. Remove the plastic protective caps from the horizontal
sliding arm. Remove the rear protective cap from the
locking lever.
Fig. 17: Removing protective caps
5. Use straps or chains to attach the upper part of the
column to a block and tackle for lifting weights. Tension
the straps or chains slightly.
Fig. 18: Lifting straps
Robert Bosch GmbH