Maintenance; Suggested Lube; Cleaning And Servicing; Maintenance Intervals - Bosch TCE 330-TCE 230 Originalbetriebsanleitung

6.

Maintenance

6.1

Suggested lube

Component Lube
Pneumatic ESSO FEBIS K 32
Tab. 1: Lubricants table
!
The manufacturer is not liable for any damage
caused by use of lubes different from those shown in
the table.
6.2

Cleaning and servicing

Before any cleaning or maintenance interven-
tion, disconnect the pneumatic system of the
TCE 330-TCE 230.
To guarantee full efficiency of the TCE 330-TCE 230 and
to ensure functioning without anomalies it is essential
to clean the machine regularly and carry out periodical
maintenance.
Maintenance has to be carried out by the operator
in accordance with the manufacturer's prescriptions
shown here below.
6.3

Maintenance intervals

Maintenance
Clean the mechanical moving parts, spray
them with nebulised oil or kerosene.
Lube the sliding guides inside the hold-
ing structure (see picture) with appropriate
grease.
Fig. 19: Parts to be lubricated
Robert Bosch GmbH
6.4
Designation
Label for mounting arms and mounting heads 1 695 101 274
Standard
Label indicating operation of helper and mas-
ter roller
ISO VG 32
Locking/release lever of moving arm
Roller
Helper actuation valve
Master roller actuation valve
x
x
Maintenance | TCE 330-TCE 230 | 33

Spare parts and wearing parts

2014-10-10
en
Order number
1 695 101 889
1 695 042 960
1 695 102 188
1 695 107 075
1 695 107 075
|
1 695 102 028