Bosch TCE 4460 Instandsetzungsanleitung Seite 51

8. Apply silicone to all the edges of one of the two halves
of the gear unit to provide a seal. Re-assemble the
two halves.
Fig. 38: Sealing and assembling
9. Fit and tighten the hexagon socket head bolts (C).
Fig. 39: Emergence of silicone
i Silicone must emerge at the edge of the gear unit
during this operation.
Robert Bosch GmbH
Replacement of components | TCE 4460-TCE 4465 | 51
10. Fill the gear unit with max. 500 ml of gear oil (prop-
erties of gear oil: see Tab. 6).
Fig. 40: Filling with gear oil
i Fitting gear unit: see Section 5.7.
en
|
1 695 100 278 2013-12-03