Voice Recording - Trotec S280 Bedienungsanleitung

3 . Press the UP and
s
DOWN arrow on the
t
omni selector to select
[Save], then press the
Menu/Enter key to save
the image.
Save Settings
1. Press the MENU/EN-
TER key.
2. Press the Left or Right
arrow on the omni
selector to select the
[Setup] menu.
3 . Press UP and DOWN
arrow on the omni
selector to select
[File], then press
the Menu/Enter key.
4. Changing save settings:
- Press the UP
s
arrow on
DOWN
t
the omni selector to
select a field to
change.
- Press the 3 LEFT or RIGHT 4 arrow on the omni
selector to change the settings
About save settings:
File Type
Sets the recording type of the image.
- Both: Saves thermal image and visual image.
- IR: Saves thermal image only.
- CCD: Saves visual image only
Storage Type
You can select the way file numbers are assigned.
- Number: This function allows you to save more
than one images at one time.
- Time: This function can be used for fix-point obser-
vation of object.
G
or
Operating manual – Infrared camera
Number / Time
This option varies to the storage type setting. When
you set the storage type to [Number], [Number] in this
option is available. When you set the storage type to
[Time], [Time] in this option is available.
- Number: Sets the number of images saved at one time.
- Time: Sets the shooting interval time.
Attaching Voice Memos to Images
You can attach up to 40 second voice memo to an image.
1. Connect the headset to the camera body.
2. Freeze an image, the Press the MENU/ENTER key.
3 . Press the 3LEFT or
RIGHT 4 arrow on the
omni selector to se-
lect the [File] menu.
4. Press UP and DOWN
s
arrow on the omni
t
selector to select [Voice
REC], then press the
Menu/Enter key.
- The [Voice Recording]
message will appear
on the LCD monitor
or viewfinder.
5. Speak toward the microphone of the headset. To
stop recording, press the C key.
6. Save the image.
m
the storage capacity of the memory will not
decrease when you attach voice comment
to an image.
Attaching Text Memos to Images
1. Freeze an image, then Press the MENU/ENTER key.
2. Press the 3LEFT or
RIGHT 4 arrow on the
omni selector to se-
lect the [File] menu.
B - 18