Trotec S280 Bedienungsanleitung Seite 32

- Do not attempt to disassemble, alter or apply heat to
the batteries
This is serious risk of injury due to an explosion.
Immediately flush with water any area of the body,
including the eyes and mouth, or clothing, that comes
into contact with the inner contents of a battery. If
the eyes or mouth contact these substances, imme-
diately flush with water and seek medical assistance.
- Avoid dropping or subjecting the batteries to severe
impacts that could damage the casings.
It could lead to leakage and injury.
- Do not short-circuit the battery terminals with metallic
objects, such as key holders
It could lead to overheating, burns and other injuries.
- Before you discard a battery, cover the terminal with
tape or other insulators to prevent direct contact
with other objects
Contact with the metallic components of other materials
in waste containers may lead to fire or explosions. Dis-
card the batteries in specialized waste facilities if
available in your area.
- Use only recommended batteries and accessories
Use of batteries not expressly recommended for this
equipment may cause explosions or leaks, resulting
in fire, injury and damage to the surroundings.
- Disconnect the compact power adapter from both
the IR camera and power outlet after recharging
and when the IR camera is not in use to avoid fires
and other hazards
Continuous use over a long period of time may cause
the unit to overheat and distort, resulting in fire.
- Do not use the battery charger or compact power
adapter if the cable or plug is damaged, or if the plug
is not fully inserted into the power outlet.
The battery charger varies according to region.
- Exercise due caution when screwing on the separately
sold tele-lens, close-up lens
If you loosen, fall off and shatter, the glass shards
may cause an injury.
B - 3
- If your camera is used for prolong periods, the IR
camera body may become warm
Please take care when operating the IR camera for an
extended period as your hands may experience a bur-
ning sensation.
Prevent Malfunction
Read on to learn about preventing malfunction of IR
camera.
- Avoid damaging the detector of the IR camera
- Avoid Condensation Related Problems
Moving the IR camera rapidly between hot and cold
temperatures may cause condensation (water drop-
lets) to form on its external and internal surfaces.
You can avoid this by placing the IR camera in the
plastic case (bundle) and letting it adjust to tempe-
rature changes slowly before removing it from the
case.
- If Condensation Forms Inside the IR Camera
Stop using the camera immediately if you detect con-
densation. Continued use may damage the IR camera.
Remove the PC card, and battery or a household po-
wer source, from the IR camera and wait until mois-
ture evaporates completely before resuming use.
- Extended Storage
When not using the IR camera for extended periods of
time, remove the battery from the IR camera or battery
charger and store the IR camera in a safe place. Storing
the IR camera for extended periods with battery ins-
talled will run down the battery.
Operating manual – Infrared camera
G