Commands Available From The Computer - Sony YS-DX516P Bedienungsanleitung

Commands available from the
Computer
1-16 (90-9F)
To select the picture from a camera to be displayed full
screen on monitor 1.
MULTI (82)
To display a 16 or 9 divisions split screen on monitor
1.
QUAD (83)
To display a 4 divisions split screen on monitor 1.
OPTION (84)
To display a 13 or 6 divisions split screen on monitor
1.
SEQUENCE (87)
To switch the display mode from full screen to
sequential display on monitor 1.
ZOOM (85)
To zoom in the picture on monitor 1.
FREEZE (86)
To freeze the picture on monitor 1.
LIVE (80)
To select the live input mode.
VCR (81)
To select the VCR playback input mode.
MON2 (88)
To set the output at monitor 2, it can be used in
combination with the monitor 1 display.
MENU (74)
To display the menu on monitor 1.
+ (65), – (66)
To select settings (ON/OFF, numbers, letters, symbols)
in the menus.
V (54), v (64), b (63), B (53)
To change selection in the menus. (To move the cursor
up/down, right/left.)
NEXT (75)
To select the sub-menu in (SENSOR SET) and
(DISPLAY SET) menus.
EXIT (76)
To go to the next menu, or to exit the menu mode.
MENU RESET(E1)
To reset all the values of the displayed menu to the
default values.
CLOCK ADJUST (E0)
To reset the clock minutes and seconds setting to
00:00.
POWER ON (7C)
To turn on the power.
POWER OFF (7D)
To turn off the power.
SECURITY LOCK ON (69)
To set the security lock.
SECURITY LOCK OFF (6A)
To cancel the security lock.
ALARM MENU (89)
To display the ALARM LIST.
ALARM RESET (8A)
To cancel the alarm security lock.
63
(GB)