Connection
Before making any connection, make sure all the
devices are turned off.
Before making the connections, please refer to the
Basic Connection
Notes
The camera signal input at each CAMERA IN terminal
is throughput at the corresponding CAMERA OUT
terminal. The CAMERA IN terminals are
automatically terminated at 75 Ω.
• When no connection is made to the CAMERA OUT
terminal, the CAMERA IN terminal 75 Ω termination
is made automatically.
12
(GB)
instruction manual accompanying each device. If the
devices are not connected properly, that may cause a
fire and/or damages.
• When a connection is made to the CAMERA OUT
terminal, the CAMERA IN terminal termination is
open, you must therefore make sure the CAMERA
OUT side is terminated.
• With model YS-DX416CE, use black and white
cameras only. If color cameras are used, that may
cause image beat, etc.
Video cameras
to VIDEO IN
Monitor (not supplied)
to VCR IN
to VCR OUT
Timelapse VCR
(not suplied)
to CAMERA IN
to VIDEO IN
ALARM
input
terminal
Ground
Ground
Switching output
terminal