Setting Each Camera Display Position In Split Screen Display - Menu - Sony YS-DX516P Bedienungsanleitung

Menu Setting Mode
7
Press the NEXT button to return to the (CAMERA
SET) menu display, or
Press the EXIT button to exit the menu display.
Modifying the sensor position
In the default sensor screen, the first line of sensor
positions will be empty. If you need to set sensor
points on this line, please first follow the steps below.
1
Using the V (or v) button, highlight the "LEVEL
DAY" setting.
2
Using the b (or B) button, move the cursor to the
arrow (r), then press the + (or –) button.
The last line of sensor positions will move to the
top of the screen.
Setting Each Camera Display
Position in Split Screen Display
– Menu 8
You can set where each camera will be displayed when
viewing a split screen display. Setting for 16 divisions
9 divisions split screen is available.
POSITION SET
Changing a Camera Position
Example: To interchange the display positions of
camera 5 and camera 16.
56
(GB)
1
Press the MENU button 8 times to display the
(POSITION SET) menu.
The 16 divisions setting screen is displayed.
Press the NEXT button to switch between the 9
divisions and the 16 divisions setting screens.
2
Using the V, v, b and B buttons, move the cursor
to the first camera number (05).
3
Press the + (or –) button to change the number to
the desired camera number (16).
• When a camera is moved to a certain position, it
will switch display positions with the camera that
was previously displayed at that position. You
cannot display the same camera image on two
positions.