Monitor Settings - Menu 6 - Sony YS-DX516P Bedienungsanleitung

Menu Setting Mode
Monitor Settings – Menu 6
You can set the automatic sequential display speed on
each monitor and the display sequence order. Also,
you can have the live and/or recorded picture from
certain cameras masked so that they are not visible on-
screen.
MONITOR SET
Setting the Monitor Display
1
Press the MENU button 6 times to display the
(MONITOR SET) menu.
2
Press the v button to highlight the setting to
modify.
Using the + (or –) button, select the desired setting,
then press the v button.
Following this procedure, select the settings or
MON1 SEQ. TIMER ... COLOR LEVEL.
3
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
(MONITOR SET) menu
MON1 SEQ. TIMER (Default setting: 1 S)
To set the full screen automatic sequential display
speed (interval) on monitor 1.
The available intervals are: 1 – 30 seconds, INDIV.
MON2 SEQ. TIMER (Default setting: 1 S)
The available intervals are: 1 – 30 seconds, INDIV.
Note
If the "INDIV." setting is used, in the (CAMERA
SET) menu, enter the desired setting for each camera
(see page 49 (GB)).
48
(GB)
QUAD SEQ. TIMER (Default setting: 1 S)
To set the 4 divisions screen automatic sequential
display speed (interval).
The available intervals are: 1 – 30 seconds
MON1 SEQ. MODE (Default setting: MODE1)
MODE1: The cameras are displayed sequentially in
order (1 to 16).
MODE2: The cameras are displayed sequentially in
the order set in the (POSITION SET) menu, when
the 16 cameras are displayed in a 16 divisions
screen (see page 56 (GB)).
MON2 SEQ. MODE (Default setting: MODE1)
MODE1: The cameras are displayed full screen
sequentially in order (1 to 16).
MODE2: The cameras are displayed sequentially in
the order set in the (POSITION SET) menu, when
the 16 cameras are displayed in a 16 divisions
screen (see page 56 (GB)).
MON2 T MON1 (Default setting: OFF)
ON: The display on monitor 2 will be the same as the
one on monitor 1.
OFF: The display mode on monitor 2 will an
automatic sequential display or full screen display
of live pictures.
MON. MASK LIVE (Default setting: ON)
ON: If, for certain cameras, in the (CAMERA SET)
menu, the "MON. MASK" item is set to "ON",
the live picture from those cameras will not be
visible on-screen.
OFF: The live picture from all cameras will be
visible on-screen regardless of the "MON.
MASK" item setting of each camera, in the
(CAMERA SET) menu.
MON. MASK VCR (Default setting: ON)
ON: If, for certain cameras, in the (CAMERA SET)
menu, the "MON. MASK" item is set to "ON",
the recorded picture from those cameras will not
be visible on-screen.
OFF: The recorded picture from all cameras will be
visible on-screen regardless of the "MON.
MASK" item setting of each camera, in the
(CAMERA SET) menu.