Location And Function Of Parts And Controls; Front Panel - Sony YS-DX516P Bedienungsanleitung

Location and Function of Parts and Controls

Front Panel

2
1
1 STANDBY indicator
When you connect the cable (supplied) to the power
outlet, the STANDBY indicator (red) is turned on
indicating that the multiplexer is in the standby mode.
2 ON/STANDBY button and indicator
Pressing the ON/STANDBY button turns on the power
and the indicator (green). Pressing the button again
turns off the power and the ON/STANDBY indicator,
and the STANDBY indicator (red) is turned on.
Note
In order to keep the unit internal temperature low, a
fan is provided on the side of the unit. If the fan does
not operate properly, the ON/STANDBY indicator will
flash to indicate a problem. Unplug the unit from the
power supply and check to make sure nothing is
obstructing the fan. If after the power is restored to the
unit, the ON/STANDBY indicator still flashes, do not
use the unit and consult your dealer.
3 INPUT SELECTOR button and indicator
Pressing INPUT SELECTOR turns on the indicator on
the button, and displays the image on Monitor 1; the
image is selected from the images of the cameras
connected to the CAMERA IN connector (1 – 16). In a
similar manner, press INPUT SELECTOR to select an
image from the camera and display the image on
Monitor 2. The indicator for the camera (where an
alarm has been activated) flashes.
8
(GB)
3 4 5 6
wa w; ql
89 0
7
qk qj qh
4 MULTI button and indicator
Pressing this button switches between the 16-divisions
screen and the 9-divisions screen.
5 QUAD button and indicator
Pressing this button switches the quad divisions screen
from subscreens 1-4, 5-8, 9-12 and 13-16.
6 OPTION button and indicator
Pressing this button causes the indicator to flash, and
display the option screen at the lower right of Monitor
1. The screen is a 13-division screen.
7 MONITOR 2 button and indicator
Pressing this button cause the indicator to flash and
activates the MONITOR 2 setup mode. Pressing this
button again cancels the MONITOR 2 setup mode.
8 MENU button
Pressing this button shows the menu screen. Every
time you press this button the menu screen switches.
qaqs
qd
qg
qf