Camera Setting - Menu 7 - Sony YS-DX516P Bedienungsanleitung

Note
The individual monitor masking setting is entered for
each camera in the (CAMERA SET) menu (see page
51 (GB)).
COLOR LEVEL (YS-DX516P only) (Default
setting: AUTO)
AUTO: 1, 2, 3, 4, 5, AUTO, 5, 6, 7, 8, 9 (A higher
number will set the colors to a depth setting.)
Notes
• In divided screen display mode, the colors will be
adjusted automatically.
• If in divided screen mode the colors depth changes
and the image is not clear, press the + (or –) button
to select the desired level.
Note
Model YS-DX416CE does not have COLOR LEVEL
function.
Camera Setting – Menu 7
For each camera connected to the unit, you can enter a
camera title, such as the camera location, etc., that will
be displayed together with the picture from that
camera. Also, each camera operating mode and timer
recording mode can be set.
CAMERA SET
1
Press the MENU button 7 times to display the
(CAMERA SET) menu.
2
The following settings are available.
When finished, press the EXIT button to exit the
menu display.
Camera number
A
B
C
D
A: A camera title (up to 10 characters) to be
displayed with the live picture of the camera
can be entered. The camera title displayed
location can be set in the (DISPLAY SET)
menu.
B: A day period and a night period can be set and
the following actions can be set accordingly.
• AL. DURATION
Set the alarm duration for each camera.
• MON. MASK
Set to ON (or OFF) for each camera, so that
the image from that camera is greyed out (or is
not greyed out) and is not visible on the
monitor.
Also, in the (MONITOR SET) menu, you
must set the monitor masking to be applied to
live and/or recorded monitoring.
• SEQUENCE
Set the sequential display interval for each
camera.
Note
"AL. DURATION" in the (CAMERA SET )
menu is displayed only when "DURATION"
in the (ALARM SET) menu (4th menu) is set
to "INDIV."
C: VIDEO LOSS
Set to ON (or OFF), then in the (VIDEO LOSS
SET) menu set the "VIDEO LOSS" item to
"INDIV." and enter each setting. If the video
signal is interrupted during live picture mode,
the image just previous to the interruption is
frozen on-screen or color bars can be displayed.
However, the frozen image and color bars
settings cannot be used together.
D: SENSOR SET
Sensor areas can be set for every camera screen
in live picture mode. By setting certain areas
that operate as video sensors, priority recording
of the concerned camera pictures can be done
when a movement is detected within the set
sensor area.
49
(GB)