Monitor 2 Operations - Sony YS-DX516P Bedienungsanleitung

MONITOR 2 Operations

Live pictures will be displayed on monitor 2 even
during VCR playback mode
MONITOR 2 button
The MONITOR 2 indicator will flash, and the live
pictures display mode on monitor 2 can be set. The
available display modes are full screen or full screen
automatic sequential display.
Example: To display full screen the image
from camera 4 on monitor 2
Monitor 1
Press the INPUT SELECTOR 4 button.
The INPUT SELECTOR 4 indicator lights, the image
from camera 4 is displayed full screen.
To switch the display mode on monitor 2 from
full screen to full screen automatic sequential
display
Press the SEQUENCE button.
The SEQUENCE indicator flashes and the pictures
from each camera are displayed sequentially full
screen, on monitor 2, according to the monitor 2
sequential mode and speed set in the (MONITOR
SET) menu (see page 48 (GB)).
Monitor 2
Monitor 2
Monitor 1
To cancel the sequential display mode and the
monitor 2 display settings
Press the SEQUENCE button, then press the
MONITOR 2 button.
To display on monitor 2 the same image as on
monitor 1
This function can be used to monitor the images from
a second location.
In the (MONITOR SET) menu, set the item
"MON2TMON1" to "ON" (see page 48 (GB)).
Note
When this setting is used, the MONITOR 2 button will
not be operated.
Monitor 2
Monitor 2
27
(GB)