Sony YS-DX516P Bedienungsanleitung Seite 54

Menu Setting Mode
(CAMERA SET) menu
SEQUENCE (Default setting: DAY and NIGHT to 1
S)
If in the (MONITOR SET) menu, the items "MON1
SEQ. TIMER" and/or "MON2 SEQ. TIMER" are set
to "INDIV.", enter the desired sequential display
interval for each camera.
The available durations are: 1 to 30 sec., SKIP
SKIP: In automatic sequential display, this camera
will not be displayed.
Setting the Video Loss Operation Mode
1
Press the MENU button 5 times. Press the v button
to go to the (VIDEO LOSS SET) menu.
2
Using the + (or –) button, set "INDIV." for the
"VIDEO LOSS" item.
3
Press the MENU button twice to display the
(CAMERA SET) menu.
54
(GB)
4
Press the INPUT SELECTOR (1 – 16) button to
select the desired camera (ex: camera 5).
5
Press the v button to highlight the "VIDEO LOSS"
item.
6
Press the MENU button to go to the next menu
screen, or
Press the EXIT button to exit the menu display.
(CAMERA SET) menu
VIDEO LOSS (Default setting: ON)
Set the action to take when there is an interruption in
the live video signal feed.
ON: A video loss alarm trigger is sent.
OFF: No video loss alarm trigger is sent.
Setting the Video Sensor Area Position,
Sensitivity Level and Response Mode
1
Press the MENU button 7 times to display the
(CAMERA SET) menu. Press the INPUT
SELECTOR (1 – 16) button to select the desired
camera (ex: camera 6).
2
Press the NEXT button.
The live picture from the selected camera and the
video sensor setting screen for that camera are
displayed.