Overview; Features - Sony YS-DX516P Bedienungsanleitung

Overview

Features

The Sony YS-DX516P/416CE Multiplexer is designed for use with multiple
camera surveillance and monitoring systems. The unit has 16 video inputs,
allowing up to 16 video channels to be displayed on a single monitor. In
addition, a full screen image can be displayed for each input signal.
A built-in character generator enables you to superimpose letters and
numerals onto each picture. Upon receiving an alarm signal, the unit can
be programmed to switch the display to the relevant location.
Using this unit you can display the live pictures from the cameras in split
screen display mode (16, 9 or 4 divisions) while recording, and the
recorded pictures can also be displayed in split screen display mode.
• High-speed switching (up to single field switching)
• 1, 4, 9, 16 screens display modes, with possibility of displaying an
automatic sequential live or recorded picture display in the bottom right
1/4 of the screen while in 16 split screen display mode.
• Full screen display on monitor 2 and during alarms automatic switching
to the alarm screen.
• The following operations are possible at each camera according to the
timer settings:
• Different alarm durations of certain or all cameras can be set according to
the day or night periods.
• Live or recorded pictures of certain or all cameras can be masked so they
are not visible according to the day or night periods.
• Automatic switching delay can be set for each camera according to the
day or night periods.
• Video sensor points areas can be set for each camera. Trigger can start
alarm recording operations in priority.
• If the video signal is interrupted at any of the cameras, the frozen image
just previous to the interruption or color bars can be displayed (selectable
for each camera).
• The unit can be controlled by computer through the RS-232C connection.
• A system controller (not supplied) can be used through the RS-485 (RJ-
11) connection.
• 2 monitors output.
• S-VIDEO input/output (YS-DX516P only).
• Up to 100 alarm entries can be displayed on-screen.
5
(GB)