Display Set Menu / Monitor Out Set Menu - Sony YS-SX310P Bedienungsanleitung

DISPLAY SET Menu / MONITOR OUT SET Menu

Setting
1
Press the MENU button, then press the SHIFT v
button to select "4. DISPLAY SET" and press the
MENU button again.
2
Press the DATA + (or –) button to select "ON" for
"LIVE CLOCK", then following the same
procedure, set "LIVE TITLE", "VCR PB
CLOCK", "VCR PB TITLE", "MON.
INTERVAL" or "MULTI MODE".
3
Press the MENU button, then press the SHIFT v
button to select "7. EXIT" and press the MENU
button again.
Changing the clock display position
• In Multi-viewer mode
To change the clock display position in Multi-viewer
mode, be sure that the LIVE CLOCK is set to "ON".
Press the SELECT button to appear the clock display.
Press the SHIFT v button to set the clock display
position as desired (6 positions), then press the
SELECT button again.
• In Multiplexer mode
To change the clock display position in Multiplexer
mode, be sure that the VCR PB CLOCK is set to
"ON". Press the SELECT button to appear the clock
display. Press the SHIFT v button to set the clock
display position as desired (6 positions), then press
the SELECT button again.
Note
You only can move the clock position in the cases
described above.
For more details, see the "MULTI MODE" in the next page.
Display Settings
LIVE CLOCK
ON: The clock is displayed when camera signals are
displayed. (To set the clock, see "CLOCK SET
Menu")
OFF: The clock is not displayed when the camera
signals are displayed.
LIVE TITLE
ON: The title is displayed when camera signals are
displayed. (To set a title, see "TITLE SET
Menu".)
OFF: The title is not displayed when camera signals
are displayed.
VCR PB CLOCK
ON: The clock is displayed when the signals from the
VCR playback are displayed.
OFF: The clock is not displayed when the signals
from the VCR playback are displayed.
VCR PB TITLE
ON: The title is displayed when the signals from the
VCR playback are displayed.
OFF: The title is not displayed when the signals from
the VCR playback are displayed.
MON. INTERVAL
0.5 to 30SEC (in 0.5 sec increments): The timing of
the sequential display on monitor.
15
(EN)