Ohms; Frequency - GE Sensing MCX Bedienungsanleitung

82
Counter
Zähler
'
Compteur
To measure electrical signals To measure electrical signals To measure electrical signals To measure electrical signals To measure electrical signals

Ohms

Ohms
Ohms Ohms Ohms
Select OHMS and DIRECT in the input
menu and press EXE to open the
workingscreen. The upper window in
the working screen indicates the
measured Ohms reading. The range is
0-2000 Ohms split into two
(auto)ranges of 0.01 to 400.00 Ohms
and 400.0 to 2000.0 Ohms. The
excitation current is 0,9 mA.
Wiring can be 2, 3 or 4 wire.
The 4 wire method is a true
measurement of voltage drop across
the unknown resistance at a constant
excitation current. Read section "Scaled
Readings" to use the SCALE option.

Frequency

Frequency Frequency
Frequency Frequency
Select FREQ in the input menu and
enter a trigger level between 10 mV
and 5.0 Volts. Press EXE to open the
working screen. The upper window of
the working screen indicates the
measured frequency reading.
The range is 0-10.000 Hz split into
three (auto)ranges of 0-655 Hz,
655-1310 Hz and 1310-10.000 Hz.
Press # and simultaneously to
&
increase the trigger level. Press # and
simultaneously to decrease the
%
trigger level. Read section "Scaled
Readings" to use the SCALE option.