GE Sensing MCX Bedienungsanleitung Seite 130

130
Protocol for RS 232 Protocol for RS 232 Protocol for RS 232 Protocol for RS 232 Protocol for RS 232
System Integration System Integration
System Integration System Integration System Integration
Function = Command
S Sample
(MCX returns time
and readings)
CS = Clear system
Rxxxx,xxxx = Repeat, number of
repeats, delay
between repeats
in seconds
Example:
R1,10 = Delay
10 seconds
ELxxx = Error level
in 0.01%
(CAL/XMT mode)
m(ASCII string) = Message, max. string
lenght is 85
characters (5 lines of
17 characters each)
Q = End procedure
Initialisation commands
Function Command
swxyz = Setting
w C/F (°C of °F)
x = 6/9
(IPTS-68 of ITS-90)
y = P/N
(Pressure module)
z = H/N
(Communicator)
Pxyz = Pressure module
(only after setting
with Pressure)
x = Range sensor 1
y = Range sensor 2
z = Pressure units