To Output Fixed Steps Manually; To Output Fixed Steps Automatically - GE Sensing MCX Bedienungsanleitung

66
D WE L L TIME
Initially the MCX outputs the preset
value of step number 1 or 0%.
Press the
step. Press the
previous step. Press
to the DIRECT mode to allow fine
adjustments with the
Press
To switch from MANUAL to AUTO
001 2 S ec
press the numerical key with the first
digit of the timer setting you want.
This will open the screen to dial the
dwell timer setting in seconds. The
dwell timer sets the time that an output
level is maintained before it changes
to the next step. Press EXE to start the
automatic stepping.
Press
mode.
Step Mode Step Mode Step Mode
Step Mode Step Mode

To output fixed steps manually

To output fixed steps manually To output fixed steps manually To output fixed steps manually To output fixed steps manually
key to output the next
#
key to output the
$
to return the MANUAL mode.
&
To output fixed steps To output fixed steps To output fixed steps To output fixed steps To output fixed steps
automatically automatically automatically automatically automatically
or to return to the MANUAL
# $
key to switch
%
and keys.
# $