Temperature Transmitter Simulation; Setting Up A Simulation; To Simulate A Transmitter - GE Sensing MCX Bedienungsanleitung

78
T/ C K
+2 0 0 .0
10 .4 0 0 m A
0-20 mA
4-20 mA
mA out
Control system
Regelsystem
Système de régulation
4-20 mA
XMTR
Control system
Regelsystem
Système de régulation
S IM
0
C
S TEP:0 4 0 %
Temperature Temperature
Temperature Temperature Temperature
transmitter transmitter transmitter
transmitter transmitter
simulation simulation
simulation simulation simulation
User can dial a temperature in degrees
to output a 4-20 mA or 0-20 mA signal.
This signal can be used to simulate
transmitters at control system input
terminals. The simulated
transmitter may be linearized or non-
linearized. Function is available for all
type of temperature sensors supplied
as standard in the MCX.

Setting up a simulation

Setting up a simulation
Setting up a simulation Setting up a simulation Setting up a simulation
Select SIM and proceed to select all
appropriate transmitter characteristics.
Ignore the CJ compensation menu.
Fill-out the transmitter span and press
EXE to open the working screen.

To simulate a transmitter

To simulate a transmitter To simulate a transmitter To simulate a transmitter To simulate a transmitter
All normal keypad functions are
available to change the (mA) output.
Use the key to move to fixed steps.
%
Use and keys to step through
# $
0%, 25%, 50%, 75% and 100% of
the span as set-up. Press
return to the normal keypad functions.
Next to the simulated temperature the
lower window shows the MCX
output milliamps in small size digits.
to
&