Parts Identification - GE Sensing MCX Bedienungsanleitung

12

Parts Identification

Parts Identification
Parts Identification Parts Identification Parts Identification
1 POWER switch
Switch to put the calibrator "ON"
and "OFF".
2 CHG. (amber LED) charging
indicator
On when batteries are charged.
The indicator should not light
when non-rechargeable batteries
are installed.
3 EXT. (green LED) external
power indicator
On when calibrator is powered
from the optional line
adaptor/charger #13603.
4 EXT. POWER INPUT Connector
for external power source.
Only suitable for optional line
adaptor/charger #13603.
5 Battery compartment cover
Release screws to get access
to batteries.
6 Battery selector switch
To select Alkaline or
Rechargeable batteries. Remove
protective sticker to get access to
the switch.
IMPORTANT: Switch position
must comply with installed
battery type.
7 Spare fuse
For replacement of a blown fuse.