Inhaltsverzeichnis
Werbung
8
Introduction
Introduction
Introduction
Introduction
Introduction
The MCX calibrator
The MCX calibrator
The MCX calibrator
The MCX calibrator
The MCX calibrator
The Multi-Calibrator model MCX has
been designed for testing and
calibration of process instrumentation
and portable test equipment. The unit
provides data to comply with the
ISO9002 requirements for calibration.
The MCX can be used to measure and
output analog and digital signals often
used in an industrial environment.
Also it can be used to simulate a
wide variety of temperature sensors.
Measurement and output/simulation
functions can be operated and
read simultaneously.
Pressure Measurements and
Pressure Measurements and
Pressure Measurements and
Pressure Measurements and
Pressure Measurements and
Calibrations
Calibrations
Calibrations
Calibrations
Calibrations
A plug-in Pressure Module model
MCX-PM is optionally available for
pressure measurements and
calibration.
Automatic Calibration
Automatic Calibration
Automatic Calibration
Automatic Calibration
Automatic Calibration
To automate calibration routines and to
store calibration data the unit has been
provided with a memory card slot.
For the same purpose the unit has a
RS 232 cable connector to interface
directly with a Personal Computer.
To perform automatic calibration, in the
field or in the workshop, the MCX is
supported by Unomat's Linkpak-W
software. The software package and
Memory Cards are optionally available
from your local Unomat Sales Office
or Distributor.
Werbung
Inhaltsverzeichnis
