Output Of Electrical Signals; Menu Selections; Set Mode; Output Mode - GE Sensing MCX Bedienungsanleitung

46
mV
+ 100.000
mV
+ 100.000
Output of electrical Output of electrical
Output of electrical Output of electrical Output of electrical
signals signals
signals signals signals

Menu selections

Menu selections
Menu selections Menu selections Menu selections
Select an output range and select
DIRECT from the menu. It puts you
right in the output mode. For other
modes read section "Special Output
Functions". The lower part of the
screen shows the window for output
functions. Here, you can read the
output level labelled with either SET
or OUTPUT.

Set mode

Set mode
Set mode Set mode Set mode
In the SET mode you change the
S E T
output reading without changing the
actual output at the terminals. Once
mV
you press EXE, the output will change
to the new setting.

Output mode

Output mode Output mode Output mode Output mode
In the OUTPUT mode you change both
the output reading and the actual output
at the terminals. Entering a new value
O U T
through the numerical keypad brings
you back into the SET mode.
mV