Storage - Silvercrest SKGL 2000 A1 Bedienungsanleitung

Clean the hotplates
detergent in it. For severe incrustations, leave the hotplates
in the water. After washing, rinse the hotplates
detergent residues. Dry everything properly. The hotplates
you put them back in the appliance!
To refit the hotplates
notches next to the fat outlet
down the front part of the hotplate
Proceed in the same way with the second hotplate
■ Clean the surfaces of the appliance with a damp cloth. For stubborn soiling,
use a mild detergent on the cloth.
■ Wipe the cleaning scraper
add some mild detergent to the cloth or rinse it in warm water and detergent.
■ Ensure that all parts are completely dry before reusing the appliance.
NOTE
► The hotplates
dishwasher safe. To protect the material, however, we recommend cleaning
it as described above.

Storage

Lock the appliance by pushing the safety catch
mains cable clockwise around the cable retainer
appliance and fasten it in place with the cable clip:
Fig. 3
Store the cleaned appliance in a dry location.
SKGL 2000 A1
which have been removed in warm water with a little
, place the hotplates
grip onto the hooks on the base. Then, press
until you hear it engage.
with a damp cloth. For more stubborn soiling,
, the fat drip tray and the cleaning scraper
to soak for a while
with clean water to remove all
must be dry before
onto the base so that the two
.
to the position . Wind the
on the underside of the
GB │ IE
are all
│ 49 ■