Cleaning; Storage; Troubleshooting - Silvercrest STGE 2000 A1 Bedienungsanleitung

Cleaning

DANGER! ELECTRIC SHOCK!
► Always pull out the plug before cleaning the appliance!
Never immerse the heating element 2 in water or other liquids!
►
WARNING!
► Allow the appliance to cool sufficiently before cleaning it. There is a risk of
burns!
ATTENTION! PROPERTY DAMAGE!
► Do not use a wire brush or other abrasive objects or abrasive or aggres-
sive cleaning agents for cleaning.
1) Clean the heating element 2 with a lightly moistened cloth.
2) Clean the cooking grill 1, the drip tray 3 and the housing 4 in warm
washing-up water. Rinse all parts after cleaning with plenty of fresh water to
remove all detergent residues.
3) After cleaning, dry all parts thoroughly and reassemble them.

Storage

♦ Store the cleaned appliance in a dry and dust-free location.

Troubleshooting

Fault
The appliance will
not switch on/does
not react.
If you cannot solve the problem using the steps above, please contact Customer Service (see
section Service).
STGE 2000 A1
Cause
The heating element 2
is fitted with a safety
switch. The appliance
can only be started if
this is inserted correctly.
The plug is not plugged
in.
The socket is not
supplying any power.
The appliance is
defective.
Remedy
Check that the heating element 2 has
been correctly inserted into the housing 4.
Insert the plug into a mains power socket.
Check the house fuses or use another
socket.
Contact the Customer Service department.
GB │ IE │ NI │ CY │
11 ■