Contact Grill" Position - Silvercrest SKGL 2000 A1 Bedienungsanleitung

"Contact grill" position

1) Insert the plug into a mains power socket and switch on the appliance using
the On/Off button
2) Set the desired temperature and heating duration, if necessary, as described
in the section "Operation" and wait until the set temperature has been
reached.
3) Open the appliance lid and place the food to be grilled on the lower
hotplate
4) Close the appliance lid using the handle.
5) The upper hotplate
account of its movable hinges, even when cooking large quantities of food.
This guarantees an optimal grilling result.
6) Check the browning of the food after a while. To do this, open the appliance
lid using the handle.
NOTE
Start with short grilling times and increase these until you have found the correct
duration.
7) When you are satisfied with the level of browning, remove the food.
CAUTION
Damage to the appliance!
► Do not use pointed or sharp objects to remove the food. These could damage
the surfaces of the hotplates
8) Use the On/Off button
power plug from the wall socket.
CAUTION
► Always remove the plug from the mains power socket when the appliance
is not in use. It is not sufficient to switch off the appliance using the On/Off
button
■ 44 │ GB │ IE
.
.
always lies parallel to the lower hotplate
!
to switch the appliance off and pull the mains
!
on
SKGL 2000 A1