K) Assembling The Main Undercarriage - Reely Piper Cherokee Bedienungsanleitung

Glue them on the décor strips (1) of the decal on the cowling side.
Attach the cowling to the fuselage with the supplied wood screws (2).
Make a suitable cutout in the cowling for the needle valve (3).
Mount the rear plate on the spinner (1) on the motor shaft. Next, slide on the
propeller (2) and plain washer (3).
Tighten the nuts (4) firmly with a ring spanner.
Important:
Always check that the nuts are fixed tightly. A propeller which
breaks off at full throttle can cause serious damage to individuals
and/or property!
Use the supplied screws to mount the spinner cap (5).

k) Assembling the Main Undercarriage

Use the cutter to open the groove for the landing gear leg.
Push the landing gear (1) into the designated opening and assemble the two
retaining lugs (2) with the supplied wood screws.
42
Figure 27
Figure 28
Figure 29