The following components not included in delivery are required for assembly and operation:
Assembly:
Soldering gun, cutter, scissors, wire cutters, mini-drill with different bits, screwdriver, screw retention lacquer, Allen key, marker, 5 min. 5-minute epoxy resin, 30-
minute epoxy resin, possibly thixotropic agents (micro-balloon or cotton flock) for thickening the resin, wood glue, sandpaper, foam plates .
Attention!
Observe the safety notes of the respective manufacturer when using glues and work with glues in well-ventilated rooms only.
Operation:
Flying requires a suitable remote control system with at least 4 channels, 4 standard servos, a combustion motor, a propeller, a switching harness and a receiver
battery as well as a suitable model fuel for the motor.
See our catalogues or our website at www.conrad.com for tried and tested accessories.
5. Explanation of Symbols
The symbol with the exclamation mark points out particular dangers associated with handling, function or operation.
The "arrow" symbol indicates special tips and operating information.