M) Assembling The Cockpit - Reely Piper Cherokee Bedienungsanleitung

m) Assembling the Cockpit

Use a sharp cutter or mill to cut the openings for the windscreen and side
windows as shown in the illustration.
Cut out the transparent windscreen along the markings. Glue the windscreen
to the fuselage.
Our tip:
While the glue is hardening, secure the window with some strips
of adhesive tape.
Apply the contours from the cut-out side windows to the supplied transparent
panel.
Cut out the side windows along the markings. Glue the side windows to the
fuselage from inside.
Our tip:
While the glue is hardening, secure the window with some strips
of adhesive tape.
Figure 36
Figure 37
Figure 38
45