Assembling The Model Vehicle - Reely Free Men Bedienungsanleitung

8. Assembling the model vehicle

Required tools:
• Phillips screwdrivers in different sizes
• 1.5 mm hexagon socket wrench
• 2.0 mm hexagon socket wrench
• 5 mm socket wrench
• 7 mm socket wrench
• Needle-nose pliers
• Cutters
• Wire cutter
• Chassis shear
• Chassis drill
• Grease (for gears and differential gears)
• Thread-locking fluid (medium strength)
Practical tips:
Assembly also requires a suitable rubber pad. If necessary, a rubber mat from the automotive sector can
be used as a mounting pad.
Before you start assembling the model, check the scope of delivery of individual parts. The package should contain a
total of 16 sealed plastic bags marked with letters A – O for assembly of the model.
Some larger bags (for example, bag B) include other small bags that are also marked letters and numbers, for
example, B-1 or B-2. For a better overview, some small bags include other smaller bags with separately packed
components (e.g. screws). These smaller bags are marked, for example, B-2-1.
Important!
In addition to these operating instructions, refer to the separate assembly instructions. The procedure for
proper assembly of the model vehicle is shown in 43 clear drawings. These assembly instructions also
contain additional information and practical tips for each assembly stage.
A sketch of the required screws with the respective dimensions can always be found at the top left of the assembly
instructions. The number in brackets indicates the quantity of screws. A label for the parts bag required for each as-
sembly stage can be found at the top right of the sketch drawings. To avoid confusion, only open the parts bag that is
needed for the assembly stage.
Then check the contents against the sketch and place the components and screws at the respective assembly sites.
Do not go to the next assembly stage and do not open another parts bag until you have assembled all parts from the
current assembly stage.
31