Interface Personalisation; Lock/Unlock - Selco Genesis 1700 AC/DC Betriebsanweisung

Select the required program by pressing button (4)
Select the required program by rotating the encoder.
Only the memories location occupied by a program
are retrieved, while the empty ones are automatically
skipped.
4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
Confirm the operation by pressing button (2)
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
34

3.7 Interface personalisation

Allows the parameters to be customized on the main menu.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PROCESS
MMA
XE
TIG DC
.
TIG AC
MMA
XA
TIG DC
TIG AC
MMA
XP
TIG DC
TIG AC
.

3.8 Lock/unlock

Allows all the settings to be locked from the control panel with
a security password.
Enter set-up by pressing the encoder key for at least 3 seconds.
Select the required parameter (551).
.
.
Activate the regulation of the selected parameter by pressing the
encoder button.
PARAMETER