SSS Siedle DCA 650-02 Programmieranleitung Seite 153

Changing service functions
- Service receiver
- Call button assignment
Service receiver
Using the scroll button, return to
menu point 5.3.
If a user is called from the door
loudspeaker, it is possible to speak
and listen in from the plugged-in
service receiver to the door.
In order to change the service
receiver function, press the program-
ming button.
With the scroll buttons, change
between Service receiver „On" and
„Off".
Pressing the programming button
confirms your setting and returns
you at the same time to the start of
menu point 5.3.
Testing the call button
assignment
Use the scroll button to move to
menu point 5.4
To test which call button is assigned
to which DCA 650-... user and
which direct call number has been
stored in each case, the program-
ming button has to be pressed.
Press the assigned call buttons at the
door loudspeaker.
The user and the stored direct call
number of this user are displayed.
Pressing the programming button
confirms your setting and returns
you at the same time to the start of
menu point 5.4
5.3
Service receiver
change with
OK
Service receiver
ON
OK
5.4
Call btn assignm
test with
Actuate
Call button(s)
User
123456
OK
Display
<OK>
Press the programming button
Display
<OK>
Press the scroll button
Press the programming button
Press the scroll button
Display
<OK>
Press the programming button
Display
Display
1
Press the programming button
Press the scroll button
37