SSS Siedle DCA 650-02 Programmieranleitung Seite 135

Public network parameters
- Call acceptance
Call acceptance
In the call acceptance menu point, it
is possible to define the number of
call signals which occur before the
DCA 650-... cuts into the call. If, for
example, 5 call signals are set, and
a call comes in to this terminal, 5
signals are transmitted to the DCA
before the DCA 650-... responds,
in a similar way to an answering
machine.
The default setting is for no call
acceptance to take place
(Call acceptance None)
The setting must be changed
If the door opener is to be controlled
with #61 or if remote control func-
tions or extended control functions
(only possible in connection with
DCSF 600) are to be carried out,
or for configuration changes, e.g.
function #101.
Press the programming button in
order to change the number of call
signals.
Using the scroll button, set the
required number of calls at max. 9.
Using the programming button,
confirm the set number.
Use the Escape button to quit the
public network parameters menu
point
Use the scroll buttons to move
to the next menu point, change
concierge function.
Call acceptance
change with
OK
Call acceptance
None
OK
Call acceptance
change with
Esc
Publ. nwk. param.
change with
Display
<OK>
Press the programming button
Display
<OK>
Keep pressing the scroll button until
the number of calls is set.
Press the programming button
Display
<OK>
Press the Escape button
Display
<OK>
Press the scroll button
19