SSS Siedle DCA 650-02 Programmieranleitung Seite 142

Dialling using code lock module COM 611-...
Using the programming button,
confirm the active status of the DL
With the BTS/BTC telephone receiver
in position at the DCA 650-... a
speech connection exists to the
active BTLM, which is beneficial
when programming. At the door
station, now enter the numbers (1-8
digits) at the code lock module
COM 611-... If you hear a negative
acknowledgement tone, repeat the
input.
The direct call number is a telephone
number which is dialled when a
door call is made to the relevant user
(in this case user 1). Maximum of 22
digits, optional numbers 0 - 9, *, #
and F (flash function only possible at
the 1st digit before the call number).
Using the programming button,
confirm the direct call number.
Programming additional users.
Repeat the input of additional users
until all users you had selected at
the start of programming have been
entered.
Terminate the programming session
by pressing the Prog Mode button at
the BNG/BVNG 650-...
26
OK
Assign call button
for user
Direct call no.
_ <OK>
OK
Doorloudspeaker
active? <OK>
OK
Assign call button
for user
Press the programming button
Display
1
Enter the 1-8 digit code at the code
lock module COM 611-... , confirm
with bell symbol button until a long
continuous tone is audible.
Enter the call number you wish to
1
be dialled at the COM 611-... Press
the scroll button in order to select
the number and the cursor button to
switch to the next number.
Press the programming button to
confirm your input. Terminate the
programming session by pressing
the Prog button at the BNG/BVNG
or programming other users.
Display flashes!
Press the programming button to
confirm your input.
Enter other codes at the code lock
module COM 611-...,
2
confirm your input with the bell
symbol button.