SSS Siedle DCA 650-02 Programmieranleitung Seite 122

DCA 650-02 User interface
Explanation of symbols and button functions
Socket
Programming
OK
button
Escape button
Esc
Scroll button
Cursor button
6
For the receiver of a BTS/BTC or
HTS/HTC for a speech connection
to the door during call button
programming.
Used to enter the programming
mode and to confirm (save) inputs.
Used to quit the individual
programming menus and to
terminate the programming session.
Used to scroll forwards and back
during programming.
Used to move the cursor forwards
and back when entering numbers.
The scroll and cursor buttons are
equipped with a repeat function.
If the buttons are held down, the
numbers continue to index onwards,
or the cursor changes continuously
between the individual positions.
Volume control at the DCA:
P1 towards the door
P2 towards the telephone
Application
The DoorCom Analog DCA 650-
..., which comes in a 6-grid switch
panel housing, is used as an
interface between a Siedle door
intercom system at the Siedle-
In-Home bus system bus and an
analogue telephone connection in a
telecommunication system (TCS).
Towards the door, the DCA 650-...
acts precisely in the same way as a
BTS/BTC/BFS/BFC and is bound by
the same system limitations (number
of users, range).
The DCA 650-... can be operated in
the countries DE, EN, FR, IT, NL, DK,
CH and AT, taking into account the
EU directives.
Participants can be called by dual
tone multiple frequency dialling
(DTMF) or Flash.
Participants have DTMF
capability.
Access to the keypad and to the
display.
The lid of the housing can be
opened by pulling at the upper rim.
It covers the display, the buttons for
programming and the socket provi-
ded for plugging in the receiver of
an BTS/BTC.