SSS Siedle DCA 650-02 Programmieranleitung Seite 130

Door parameters
- Speech time
- Chain call time
Speech time
The speech time to the door is
limited to 5 minutes and set in the
factory to 3 mins.
Press the programming button
to access the speech time setting
function.
Access the required number using
the scroll buttons.
Using the programming button,
confirm the set time and scroll
through to the chain call time.
Chain call time
During a door call, the directly
assigned call number is always
accessed (direct call). If this call is not
accepted, the chain call function is
initiated, i.e. the call is forwarded to
a second user after the set period.
The chain call is set in the factory to
20 seconds.
If this function is active, it is also
started when the called user is
engaged.
Definition of call numbers takes
place under main menu 3, user
configuration, in submenu 3.2.
Press the programming button to
set the time after which the call is
forwarded in the chain.
Access the required number with
the scroll buttons and move with the
aid of the cursor button to the next
number.
Using the programming button,
confirm the set time and scroll on to
Doormatic user 1.
14
Max. speech time
change <OK>
OK
Max. speech time
3 mins. <OK>
OK
Chain call time
change <OK>
OK
Chain call time
20 secs. <OK>
OK
Doormatic USER 1
change with <OK>
Display
Press the programming button
Display
Keep pressing the scroll button until
the required time is set.
Speech time adjustable from 1 - 5
minutes in one-minute increments
Display
Press the programming button
Display
Keep pressing the scroll button/
cursor button until the required time
is set.
Chain call time adjustable from 10
to 40 seconds.
Press the programming button and
scroll button
Display