SSS Siedle DCA 650-02 Programmieranleitung Seite 141

Dialling using code lock module COM 611-...
In conjunction with a code lock
module COM 611-... it is possible
to call the users of a telephone
system by entering them at the
code lock module via DCA 650-...
. For this function, the BIM 650-02
is required. Programming for this is
started at the DCA 650-...
Registering new users with
COM 611-...
This menu point is used to register
new users, during which the
DCA 650-... tests all the users
connected to the line (max. 31
users). A user is constituted for
example by a telephone connected
to the telephone system which you
wish to be called from the door.
The test routine is started using the
programming button. The
DCA 650-... automatically tests how
many user slots are still available in
the line (bus).
If free user slots are available, the
system asks you the number of users
you wish to register. The default
value suggested by the system is 3
new users to be registered.
Using the scroll button, set the
number of users you wish to register
and confirm using the programming
button. The DCA 650-... reserves
memory space for the required
number of users and sets them up
accordingly.
At the BNG/BVNG 650-... you must
press the Prog mode button in order
to enter the programming mode
(see System Manual In-Home-Bus).
This menu is only displayed if the
programming mode is not active.
To allow the call buttons of the
door loudspeaker to be assigned to
a user, this door loudspeaker must
be activated (see System Manual
In-Home-Bus)
Users at the telephone system
can be dialled using
1-8 digit numbers
2
Register new
user with
OK
Registering users
Please wait!
No new users
possible
Number of new users
03 new users
OK
Registration in progress!
03 new users
Switch on the prog. mode
at the BSG
Doorloudspeaker
enable
Doorloudspeaker
actively
Display
<OK>
Press the programming button
Display flashes!
Display
if the max. number of users is
<OK>
already allocated.
Press the programming button
Only the maximum number of
<OK>
available users can be entered.
Press the scroll and/or programming
button
Display flashes
Press the BNG/BVNG 650-...
programming mode button
Display flashes
Activate the BTLM by holding down
(4 secs.) the light button
Display stops flashing
when a BTLM is active.
25