SSS Siedle DCA 650-02 Programmieranleitung Seite 146

Changing the user configuration
- Changing the chain call function
- Changing the ID tone
Chain call function
In this menu point, the chain call
function can be switched on or off
in accordance with control function
#810 or #811.
(Only possible if the chain call
number is defined)
If you wish to change the chain call
function, press the programming
button to confirm.
Use the scroll buttons to change
between on and off.
Pressing the programming button
confirms the setting and at the
same time returns you to the start of
menu point 3.3.
Use the scroll button to move on to
menu point 3.4.
Changing the ID tone
For users 1 to 3, two different ID
tones can be selected which differ
from the call rhythm.
The ID tone is superimposed at a
telephone which is called from the
door after lifting the receiver, until
acceptance of the door call (optional
number 0 - 9)
If you wish to change the ID tone,
press the programming button to
confirm.
Use the scroll button to change
between ID tone 1 and 2.
Pressing the programming button
confirms the setting and returns
you at the same time to the start of
menu point 3.4.
Using the scroll button, return to
menu point 3.5.
30
3.3
Chain call no.
change with
OK
Chain call fct.
off
OK
Chain call fct.
change with
3.4
ID tone
change with
OK
ID tone
1 (1-2)
OK
ID tone
change with
Display
USER 1
<OK>
Press the programming button
Display
USER 1
<OK>
Press the scroll button
Press the programming button
Display
USER 1
<OK>
Press the scroll button
Display
USER 1
<OK>
Press the programming button
Display
USER 1
<OK>
Press the scroll button
Press the programming button
Display
USER 1
<OK>
Press the scroll button