SSS Siedle DCA 650-02 Programmieranleitung Seite 119

Programming structure
DCA 650-02 V 2.x
S. SIEDLE & SÖHNE
Esc
OK
Sprache/Language Sprache
ändern/change <OK> Deutsch
Esc
Enter PIN
0000 <OK>
1 2
System config. Register new
change with <OK> user with <OK>
OK Esc
PIN setting Registering user
Please wait!
change with <OK>
The unassigned user
Door parameter
addresses of the
change with <OK>
In-Home bus system
are read out.
Programming proce-
dure page 21.
Publ. nwk. param.
change with <OK>
Concierge fct.
change with <OK>
DoorCom Analog
®
DCA 650-02
The DCA 650-... is a high-powered
interface used to actuate a door
intercom system at a telecommuni-
cation system.
In a large number of systems, it will
certainly only be necessary to carry
out a few essential programming
steps for commissioning purposes.
<OK>
OK
3
User config.
change with <OK>
OK Esc OK
User 1
<OK>
change with <OK>
Direct call no.
change with <OK>
Chain call no.
change with <OK>
Chain call fct.
change with <OK>
However, the system and the per-
for mance features can be upgraded
at any time without problems and
so additional uses can be integrated
at a later date as required.
Standard settings which are
essential during commissioning:
Menu points 2
Registering new users
Select language:
Deutsch
English
Francais
Italiano
Dansk
Nederlands
save
and return with
4
In-home function
change with <OK>
Esc OK
Call btn assignm
change with <OK>
Dir. door select
change with <OK>
BSx actuation
change with <OK>
5
Service function
change with <OK>
Esc OK
Default status
change with <OK>
Door call accept.
change with <OK>
Service receiver
change with <OK>
Call btn assignm
test with
Localization
change with <OK>
Extended functions with
supplementary uses
In order to make full use of all the
performance features, all the menu
points must be looked at individually
and changed where appropriate.
Esc
<OK>
3