SSS Siedle DCA 650-02 Programmieranleitung Seite 131

Door parameters
- Doormatic
- Doormatic release
Doormatic
The Doormatic function can only
be activated for user 1. When
the Doormatic function is active,
the door release is automatically
actuated for 3 secs. after actuating
the call button to user 1.
In the default status, the
Doormatic function is disabled.
Press the programming button
to access the Doormatic release
function.
Press the programming button again
and use the scroll button to change
the disabled and enabled status as
required.
With Doormatic release
Use the programming button
to confirm the setting. Move to
another submenu point using the
scroll button.
Doormatic signal
If Doormatic is functional, the door
call can be made after the call
button has been pressed with an
acoustic call signal or without.
Press the programming button to
enable you to change the signalling
method. The default setting is with
call.
Using the scroll button, change if
required between the two setting
possibilities. Use the programming
button to confirm the displayed
value.
Use the scroll buttons to move to
the next menu point.
OK
Doorm. release
change with
OK
Doorm. release
disabled
OK
OK
Doormatic signal
change with
OK
Doormatic signal
with call
OK
Doorm. function
change with
Press the programming button
Display
<OK>
Press the programming button
Display
<OK>
Use a scroll button to switch
backwards and forwards between
disabled and enabled.
Press the programming button
Display
<OK>
Press the programming button
Display
<OK>
Press the scroll button
Press the programming button
Press the scroll button
Display
<OK>
15