SSS Siedle DCA 650-02 Programmieranleitung Seite 124

Audible tones
Depiction of the audible tones that
are generated when the DCA is used
and can be heard in the telephone
receiver.
ID tone 1
ID tone 2
ID tones 1 and 2 can be assigned, for instance,
to two different doors.
ID tone 1 also sounds whenever you call the DCA 612.
Special ID tone 1
Special ID tone 2
When activating the extended functions,
Special ID tone 1 replaces ID tone 1 and
Special ID tone 2 replaces ID tone 2
Active tone
Passive tone
The active/passive tone sounds only once per status enquiry.
On a call through a DCSF input, the active/passive tone is generated
cyclically.
Positive acknowledgement tone
Sounds after a function has been correctly executed.
Negative acknowledgement tone
Sounds on incorrect input of functions or on timeout.
Engaged tone
Sounds after a call is aborted, for example due to timeout.
Possible enquiries:
(Only with existing DCA telephone
connection)
#21x to #23x Relay 1 to 3
#31x to #33x Inputs 1 to 3
#41x Concierge funct.
#81x to #83x Chain call function
User 1 to 3
#99x Doormatic funct.
8
After selecting the function e.g. #22
for relay 2, a passive tone sounds if
the relay has not switched (picked
up). If the relay has switched (picked
up), an active tone sounds.
By then dialling „0" or „1", the
relay can be switched over to the
other status.