SSS Siedle DCA 650-02 Programmieranleitung Seite 143

Dialling using display call module DRM 611-...
In conjunction with a display call
module DRM 611-... it is possible
to call the PBX extensions of a
telephone system. For this function,
the BIM 650-02 is required. After
selecting a name at the DRM, the
DCA 650-... dials the call number
of the user at the telephone system.
Programming for this function is
started at the DCA 650-... .
Registering new users with
DRM 611-...
This menu point is used to register
new users, during which the
DCA 650-... tests all the users
connected to the line. (max. 31
users). A user is constituted for
example by a telephone connected
to the telephone system which you
wish to be called from the door.
The test routine is started using the
programming button. The
DCA 650-... automatically tests
how many user slots are still free
in the line (bus). If free user slots
are available, the system asks you
the number of users you wish to
register. The default value suggested
by the system is 3 new users to be
registered.
Using the scroll button, set the
number of users you wish to register
and confirm using the programming
button. The DCA 650-... reserves
memory space for the required
number of users and sets them up
accordingly.
At the BNG/BVNG 650-... you must
press the Prog mode button in order
to enter the programming mode
(see System Manual In-Home-Bus).
This menu is only displayed if the
programming mode is not active.
To allow the call buttons of the
door loudspeaker to be assigned to
a user, this door loudspeaker must
be activated (see System Manual
In-Home-Bus)
Selection of users at the
telephone system takes place
using a list of names stored in the
DRM 611-... Prior to programming
the DCA 650-... all the names must
be stored at the DRM 611-... For
this, use the programming instruc-
tions for the DRM 611-...
2
Register new users
with
OK
Registering users
Please wait!
No new users
possible
Number of new users
03 new users
OK
Registration in progress!
03 new users
Switch on Prog mode
at the BSG
Doorloudspeaker
enable
Display
<OK>
Press the programming button
Display flashes!
Display
if the max. number of users is
<OK>
already allocated.
Press the programming button
Only as many users can be selected
as there are slots still available.
<OK>
Press the scroll and/or programming
button
Display flashes
Press the BNG/BVNG 650-...
programming mode button
Display flashes
Activate the BTLM by holding down
the light button
Display stops flashing
when a BTLM is active.
27