SSS Siedle DCA 650-02 Programmieranleitung Seite 121

Assign call btn.
for user
Direct call no.
-
OK
Doorloudspeaker
enable
OK
Assign call btn.
for user
Direct call no.
-
OK
Doorloudspeaker
enable
OK
Assign call btn.
for user
Direct call no.
-
Press the call button on the door
loudspeaker that you want to
1
allocate. A long signal tone is heard
at the door loudspeaker and the
display changes to:
Use the cursor buttons to enter the
1
PBX extension/number you want to
<OK>
call (e.g. PBX extension 258) and
confirm with the OK button.
Since the door loudspeaker is still
active (still in programming mode),
<OK>
confirm the text on the display with
the OK button.
Press the call button on the door
loudspeaker that you want to
allocate. A long signal tone is heard
2
at the door loudspeaker and the
display changes to:
Use the cursor buttons to enter the
2
PBX extension/number you want to
<OK>
call (e.g. PBX extension 445) and
confirm with the OK button.
Since the door loudspeaker is still
active (still in programming mode),
<OK>
confirm the text on the display with
the OK button.
Press the call button on the door
loudspeaker that you want to
allocate. A long signal tone is heard
3
at the door loudspeaker and the
display changes to:
Use the cursor buttons to enter the
3
PBX extension/number you want to
<OK>
call (e.g. PBX extension 445) and
confirm with the OK button.
Press the ESC button on the DCA
twice to close the programming
menu and press the programming
button on the BNG/BVNG 650-... to
switch off programming mode.
For more detailed programming
instructions, please see page 9 ff.
Programming steps in conjunc-
tion with two or more door
stations.
In systems with several door
loudspeakers, the call buttons of
all other door loudspeakers can be
assigned to already registered users
using the menu "Change In-home-
config." and/or "Change call button
assignment".
5