SSS Siedle DCA 650-02 Programmieranleitung Seite 125

Commissioning/programming
Commissioning
Following the installation of all
system users, the system can be
commissioned.
Permanent displays
When the power supply is connec-
ted, one of the following permanent
displays appears in the
DCA 650-02 display window.
i
The system is only opera-
tional if one of the adjacent
displays is indicated at the
DCA 650-... , whereby the version
number (V 2.0) may differ.
If no entry is made in the
program ming mode for a
period of longer than ten minutes,
the DCA 650-... automatically
switches back to the operating
mode.
Programming
Programming of the DCA 650-...
takes place using the integrated
buttons and is supported by the
display.
In order to program the system with
all the functions, the complete
in stallation of all system users must
have first been completed.
Programming of the inputs and
outputs can only be carried out
if the switching/remote control
interface DCSF 600-... is plugged
into the DCA 650-....
DCA 650-02
S. SIEDLE & SÖHNE
DCA 650-02
Making connection
DCA 650-02
Connection
DCA 650-02
Call
!
It is not possible to program
several DCA 650-... units
simultaneously at a In-Home-bus
system.
This permanent display is always
V 2.x
present as long as the system is in
operation (no action on a/b line).
During programming, you will be
prompted by the display in dialogue.
a/b line engaged, connection not
V 2.x
yet made.
a/b line engaged, connection has
V 2.x
been made (but no statement
about speech connection to door
loudspeaker).
DCA being called on the a/b
V 2.x
interface (only possible with active
call acceptance function, please see
„Public network parameters - Call
acceptance").
PIN protection
The programming menu of the
DCA 650-... can be protected by
means of a PIN against unauthorized
access.
No default PIN has been defined.
(PIN 0000)
PIN = Personal Identification Number
4-figure personal code
9