SSS Siedle DCA 650-02 Programmieranleitung Seite 139

Registering new users
The direct call number is a telephone
number which is dialled when
making a direct door call to the
relevant user (in this case user 1).
Max. 22 digits, any number possible
between 0 - 9, *, #, and F (flash
function only in the 1st position
before the call no.).
Using the scroll buttons and the
cursor buttons, enter the required
direct call number.
Pressing the programming button
confirms the direct call number
and returns you automatically to
„Point A", in order to execute the
call number assignment for the next
user.
Using the programming button,
confirm the active status of the user.
Repeat the programming steps
described above until all users have
been assigned a call button.
At „Point A", if required for call
button assignment, it is possible
to change to a different door
loudspeaker by activating it.
If the programming mode is
deactivated during user registration,
the system quits the current menu
point with a relevant message.
Quit the menu point using the
Escape button. This returns you
to main menu 2 „Registering new
user".
Using the scroll button, move to the
next main menu
Change user configuration.
Direct call no.
_
OK
Doorloudspeaker
active?
OK
In-home-config.
aborted
Esc
Display
1
<OK>
Press the scroll button to select the
number and cursor button to switch
to the next number.
Press the programming button
Display flashes!
<OK>
Press the programming button
Press the programming button or
the escape button
<OK>
Press the escape button
Press the scroll button
23