SSS Siedle DCA 650-02 Programmieranleitung Seite 137

Registering new users
Registering new users
In this menu point, new users are
registered. This involves the
DCA 650-... checking all the users
connected to the line (max. 31 users
possible).
Use the programming button to
start the check.
The DCA 650-... checks
automatically how many users are
still free in the line (bus).
Once the maximum user number has
been reached, this display appears.
Use the programming button to
return to the start of the menu.
If there are still free users available,
after the number of new users you
will be asked if you now wish to
register. The default setting is 3
users to be registered if there are
still at least this many which may be
connected.
Using the scroll button, set the
required number of users and
confirm with the programming
button.
The DCA 650-... reserves storage
space for the required number
of users and sets up the system
accordingly.
At the BNG/BVNG 650-..., the
program ming mode button must
be pressed in order to enter the
programming mode (see System
Manual In-Home-Bus).
This menu is only displayed if the
programming mode is not active.
To allow the call buttons of the door
loudspeaker to be assigned to a
user, this must be switched to the
active mode (see System Manual
In-Home-Bus).
2
Register new
user with <OK>
OK
Register user
Please wait
No new user
possible
No. of new users
03 new users
OK
Registr. running
03 new users
Switch on prog.
mode at BNG/BVNG
Doorloudspeaker
enable
Doorloudspeaker
actively
Display
Press the programming button
Display flashes
Display when max. no.
of users is reached.
<OK>
Press the programming button
Only as many users can be selected
as are still free.
<OK>
Press scroll button and/or
programming button
Display flashes
Press BNG/BVNG 650-... prog. mode
button
Display flashes
Activate doorloudspeaker
Display no longer flashes when an
doorloudspeaker is active.
21