SSS Siedle DCA 650-02 Programmieranleitung Seite 132

Door parameters
- Switching the Doormatic function on/off
Switching the Doormatic
function on and off
The Doormatic function permits the
door release to be automatically
actuated after a completed door call.
If the Doormatic function is active,
e.g. during surgery or business
hours, this eliminates the need to
manually actuate the door release
every time.
This Doormatic function can be
switched on and off from a tele-
phone or additionally via a switch/
time switch provided on site in
conjunction with DCSF 600-... or
directly at the DCA 650-... during
programming. All switching points
enjoy equal rights and can only be
released or disabled centrally in the
Doormatic release menu point.
Press the programming button to
enable you to switch the Doormatic
function on/off.
Using the scroll button, change
between On and Off. In the default
status, the Doormatic function is
switched off.
Use the programming button to
confirm the setting.
Using the Escape button, quit
the submenu and by pressing the
Escape button again, quit the Door
parameters menu point.
Use the scroll button to reach the
next menu point
Public network parameters
16
OK
Doorm. function
OFF <OK>
Doorm. function
ON <OK>
OK
Doorm. function
change with <OK>
Esc Esc
Doormatic
change with <OK>
Press the programming button
Display
Press the scroll button
Display
Press the programming button
Display
Press the Escape button twice
Display
User1
Press the scroll button