SSS Siedle DCA 650-02 Programmieranleitung Seite 134

Public network parameters
- Pause off hook
- Pause after public network line code system 1/2
Pause off hook
Here, the time is defined which
passes between lifting the receiver
and start of the dial process (pause
off hook) at the DCA 650-...
Press the programming button to
allow the Pause off hook time to be
changed.
Use the scroll button to set the
Pause off hook time.
Using the programming button,
confirm the time setting.
Use the scroll buttons to move to
the next menu point
Pause to public network line
code 1 or 2
must be added to the Pause off
hook time. This is the time which
passes before dual tone multiple
frequency dialling takes place. The
pause time of 1 sec. is generally
sufficient in conjunction with
modern TC systems. However,
settings up to 3 secs. are possible.
The default setting is 1 sec.
Press the programming button to
allow the „Pause to public network
line code 1" to be changed.
Using the scroll buttons, set the
„Pause to public network line code
1" time.
Use the programming button to
confirm the time setting
Use the scroll button to move to the
next menu point
18
The pause off hook time of 1 sec.
is generally sufficient in conjunction
with modern telecommunication
systems, but settings up to 3 secs.
are possible.
The default setting is 1 sec.
OK
Pause off hook
1s (1,2,3)
OK
Pause off hook
change with
Pause to
change with
OK
Pause to
1s (1,2,3)
OK
Pause to
change with
Press the programming button
Display
<OK>
Keep pressing the scroll button until
the required time is displayed.
Setting 1, 2 or 3 seconds.
Press the programming button
Display
<OK>
Press the scroll button
Display
TCS 1
<OK>
Press the programming button
Display
TCS 1
<OK>
Keep pressing the scroll button until
the required time is displayed.
Setting 1, 2 or 3 seconds.
Press the programming button
Display
TCS 1
<OK>
Press the scroll button