SSS Siedle DCA 650-02 Programmieranleitung Seite 145

Changing the user configuration
- Changing the direct call number
- Changing the chain call number
Changing the direct call number
The direct call number is selected
when a door call is initiated directly
to a user (in this case user 1).
If you wish to change the direct call
number, press the programming
button to confirm.
With the aid of the scroll buttons
and the cursor buttons, change the
direct call number.
Multiple frequency dialling digits
0 - 9, *, # and F (flash function only
in the first position before the call
number) possible.
Confirm the changed direct call
number using the programming
button. This returns you at the same
time to the start of menu point 3.1.
Continue to the next submenu 3.2
with the scroll button.
Chain call number
Chain call numbers can be
programmed for users 1 to 3.
If you wish the chain call number
to be defined or changed, press the
programming button to confirm.
Use the scroll button and cursor
button to change the chain call
number.
Multiple frequency dialling digits
0 - 9, *, # and F (flash function only
in the first position before the call
number) possible.
Using the programming button,
confirm the changed chain call
number. This brings you back at the
same time to the start of menu
point 3.2.
Using the scroll button, move to
menu point 3.3
3.1
Direct call no.
change with
OK
Direct call no.
0772350..._
OK
Direct call no.
change with
3.2
Chain call no.
change with
OK
Chain call no.
0772389..._
Note: The chain call number cannot
be used for direct call acceptance
without multiple frequency dialling!
OK
Chain call no.
change with
Display
USER 1
<OK>
Press the programming button
Display
USER 1
<OK>
Press the programming button to
select the number and the cursor
button to switch to the next
number.
Press the programming button
Display
USER 1
<OK>
Press the scroll button
Display
USER 1
<OK>
Press the programming button
Display
USER 1
<OK>
Keep pressing the scroll button
to select the number and use the
cursor button to move to the next
number.
Press the programming button
Display
USER 1
<OK>
Press the scroll button
29