Replacing The Hydraulic Oil Filter; Replacing The Ventilation/Discharge Filter - Jungheinrich EFG 535 Betriebsanleitung

6.6

Replacing the hydraulic oil filter

Replace oil filter
Requirements
– Park the truck securely, (see "Parking the truck
securely" on page 73)
Procedure
• Unscrew the hydraulic oil filter cap (151). The filter
element is located on the cap.
• Replace the filter insert; if the O ring is damaged it
will also need to be replaced. Apply a thin layer of
oil to the O ring on assembly.
• Refit the cap with the new filter element in place.
6.7

Replacing the ventilation/discharge filter

Requirements
– Park the truck on a level surface.
– Prepare the truck for maintenance and
repairs ((see "Preparing the truck for
maintenance and repairs" on page 149)).
– Remove the floor plate by undoing the floor
plate mounting screws.
Procedure
• Remove the hydraulic reservoir cover.
• Attach the breather filter (149).
• Replace the breather filter.
Z
Collect any spilled hydraulic oil. Dispose of the hydraulic oil and hydraulic oil filter
and fuel in accordance with environmental regulations.
149
151
155